u Menu Structure for Digital Operator- MODE -U1-01= 0.00HzU1-02= 0.00HzU1-03= 0.00ADRVFREF (OPR)Rdy -MONITR-FREF (d1-01)U1-01= 000.00Hz<3><4>(0.00~60.00)“0.00Hz”DRV← →FWDRdy- MODE -U1-01= 0.00HzU1-02= 0.00HzU1-03= 0.00ADRVMonitor MenuRdy- MODE - PRGModified ConstsHELPHELPDATA- MODE - PRGQuick SettingDATAHELP- MODE - PRG RdyAuto-TuningDATAHELP- MODE - PRGDATAProgrammingAUTO-MONITR-U1 -01= 0.00HzU1-02= 0.00HzU1-03= 0.00ADRVMonitorJOG FWD FWD/REVRdy -MONITR-U1- 01 = 0.00HzU1-02= 0.00HzU1-03= 0.00ADRVFrequency RefJOG FWD FWD/REVRdy-MONITR-U1- 02 = 0.00HzU1-03= 0.00AU1-04= 0DRVOutput FreqJOG FWD FWD/REVRdy-MONITR-U2 -01= oCU2-02= oPrU2-03= 0.00HzDRVFault TraceJOG FWD FWD/REVRdyJOG FWD FWD/REVJOG FWDFWDFWDFWDFWDFWD/REVModifiedX ParametersLSEQLREFLSEQLREFLSEQLREF LSEQLREFLSEQLREF LSEQLREFYASKAWAA1000A1000XXXV, X.X/X.XkWXX.XX/XX.XXAInitial Display <5><6>Figure 4.3 Digital Operator Menu and Screen Structure<1> Pressing RUN will start the motor.<2> Drive cannot operate motor.<3> Flashing characters are shown as 0 .<4> “X” characters are used as examples in this manual. The LCD Operator will display the actual setting values.<5> The Frequency Reference appears after the initial display that shows the product name.<6> The information that appears on the display will vary depending on the drive.4.1 Using the Digital OperatorYASKAWA ELECTRIC TOEP C710616 41B YASKAWA AC Drive - A1000 Quick Start Guide 774 Start-Up Programming& Operation