Sigma II User’s Manual Chapter 5: Parameter Settings and Functions5-525.3.2 JOG SpeedUse the following parameter to set or modify motor speed when operating theservomotor from a panel or digital operator.Use this parameter to set the motor speed when operating the servomotor from apanel or digital operator. If the setting is higher than the maximum motor speed ofthe servomotor, then the servomotor will rotate at its maximum speed.Parameter Signal Setting(rpm) DescriptionPn304 JOG Speed Setting Range: 0 to 10000Default Setting: 500 Speed/Torque Control,Position ControlDigital OperatorSGDH-MODE/SET DATA/CHARGE POWERSERVOPACK 200VYASKAWAPanel Operator
