Specifications14.1.2 Winding Selection Drive Series14 -614.1.2 Winding Selection Drive SeriesThe specifications for the winding selection drive series are shown in the following table.Table 14.3 Winding Selection 200 V SeriesModel UAASK FZ B-06 B-08 B-11 B-15 B-19 B-22 B-30RatedOutput*130-minute Rating (S2)50%ED Rating (S3)7.5(5.5)10(7.5)15(11)20(15)25(18.5)30(22)40(30)1HP(kW)Continuous Rating(S1)5(3.7)7.5(5.5)10(7.5)15(11)20(15)25(18.5)27(20)Ratedspeed Base Speed 500 400speed(min−1) Maximum Speed 6000 4800Output Torque at Base N·m 71 105 143 262 358 442 477MotorOutput Torque at BaseSpeed Continuous Rat-ing lb·ft(kgf·m)52.3(7.21)77.6(10.7)105.9(14.5)193.6(26.7)264.5(36.5)326.2(45.0)351.8(48.7)Rotor Inertia J (GD2/4) lb·ft 2(kg·m2)1.614(0.068)1.970(0.083)2.563(0.108)6.146(0.259)11.22(0.473)13.00(0.548)13.00(0.548)Overload Capacity 120%, 60s of 30-minute ratingVibration (μ·m) V5 V10Noise Level 75dB (A) or less 80dB (A) or lessAmbient Temperature, Humidity 0°C to 40°C (32°F to 104°F), 95% or less (non-condensing)Approx. Mass lb(kg)207(94)238(108)291(132)481(218)783(355)893(405)893(405)Model CIMR-M5j*2 25P5 27P5 2011 2015 2018 2022 2030Continuous Rated Input Current(A) 17.6 26.2 35.7 52.4 71.4 88.1 104.8Continuous Rated Output Current(A) 21 31 40 56 80 98 113Control Method Sine wave PWM Inverter (Vector control)er Speed Control Range 40 min−1 to maximum motor speedllerverterSpeed Regulation 0.2% maximum speed or lessntrollInveOverload Capacity 120%, 60s of 30-minute ratingConApprox. Mass lb (kg) 11 (5) 27 (12) 35 (16)CApplicable Magnetic ContactorModel HV-75AP4 HV-150AP4Di i i i hWidth 3.94 (100) 5.91 (150) 7.84 (200)Dimensions in inches(mm) *3 Height 13.78 (350)(mm) *3Depth 12.60 (320)14
