Appendix15 -3015.8 VS-626M5 Specifications Entry TablesEnter the specifications according to the configuration in use. Uncompleted items will be taken to be Yaskawastandard settings, as indicated by numbers in dotted-line boxes.Customer Name Model Device Name ApplicationMachining center, lathe ( ) Main axis drive/Other ( )J Machine SpecificationsPower Required Short-time rating kW ( min., %ED) Continuous rating kWPower Transmis-sion Method1. Gear --- High speed (H) Medium speed (M) Low speed (L)sion Method 2. Belt3. Direct connec-iSpeed controlrange (min−1)tion4. Built-in motor Gear ratioLoad axis/MotoraxisMotor axis con-version inertialmoment(kg S m2: GD2/4)Acceleration/de-celeration Fre-quencytimes/min. Acceleration/de-celeration time(0 ↔ Top) (s)Speedometer 1. Not used2. Used: Speedometer full scale ( ) min−1Load Meter 1. Not used2. Used: Load meter full scale ( )% (Over continuous rating)Orientation Con-trol Method1. Not used (No Orientation Card)2. Motor encoder (No Orientation Card)3. Load axis encoder (with ETC62613X)4. Magnetic sensor (with ETC62614X)5. NC orientation (No Orientation Card)Solid Tap 1. Not used --- Speed (H) Speed (L) Tap sizep2. Used Max. speed(min−1)φ to φAcceleration/de-celeration time (s)Speed Refer-ence1. Analogpence 2. Digital 2-1 Binary2-2 2-digit BCD2-3 3-digit BCD2-4 Internal speed settings3. Serial commu-nications3-1 YENET1200Input CommonMethod (M5AType Only)1. Sequence input signals 1-1 0 V common1-2 +24 V common1-3 External common2. 12-bit digital input signals 2-1 0 V common2-2 +24 V common2-3 External commonRemarks15
