14.3 Options and Peripheral Units14 -4914.3.4 Busbar and Cable Kits for Connecting UnitsBusbar and Cables are required for connections between the Converter and Inverter. Select suitable Busbarand Cable Kit from the tables below depending on the combination of Converter and Inverter. Busbar andCable Kit are not supplied with the Inverter, but must be purchased separately when needed.WARNINGD Always turn OFF the input power supply before wiring terminals.Otherwise, an electric shock or fire can occur.CAUTIOND When mounting the Busbar, use only the screws supplied.Otherwise, mounting may be incorrect.J Selecting Busbar and Cable KitsRefer to the following table when selecting Busbar and Cable KitsTable 14.21 200 V ClassUnit Combination Busbar/Cable Kits Code NumberCIMR-MR5 : Converters CIMR-M5 : Inverters23P7 72626-W10010025P527P523P7 2011 72626-W10015023P725P5 201527P5 201820222030 72626-W1002002037 72626-W10030023P7 72626-W15010025P52011 27P520112015 2011 72626-W15015020152018 20152022203020182030 20222030 72626-W1502002037 72626-W15030023P7 72626-W30010025P527P52011 72626-W3001502307 2015201820222030 72626-W3002002037 72626-W300300* A: For stand-alone drive system N: for NC system14
