3.3 Wiring Main Circuit Terminals3 -73.3 Wiring Main Circuit TerminalsThis section provides information on the specifications, functions, configuration, and wiring of main circuitterminals.3.3.1 Wires and Suitable Crimp ConnectorsSelect wires or crimp connectors to be used from the following table.Table 3.1 200 V Class Converter Power Cable SpecificationsWire SizesModelCIMR-MR5Terminal Symbols TerminalScrewTighteningTorque(N S m)UL-approved75°C (167°F)Temperature-ratedCopper Wire[AWG (mm 2)]600 V Vinyl-sheath InsulatedWire (IV, VV)60°C (140°F)(mm 2)600 V Cross-linked Polyethy-lene Wire (IC)90°C (194°F)(mm 2)600 V Rubber-insulated Cab-tyre Cable (CT)60°C (140°F)(mm 2)P/¨, N/© M6 2.94 (*1)23P7 R/L1, S/L2, T/L3 M5 2.35 14 (2.1) 2 2 223P7 A1/r, A2/t M5 2.35 14 (2.1) 2 2 2M4 1.2 − 2.0 10 (5.3) 2 2 2P/¨, N/© M6 2.94 (*1)25P5 R/L1, S/L2, T/L3 M5 2.35 12 (3.3) 3.5 2 3.525P5 A1/r, A2/t M5 2.35 14 (2.1) 2 2 2M4 1.2 − 2.0 10 (5.3) 3.5 2 2P/¨, N/© M6 2.94 (*1)27P5 R/L1, S/L2, T/L3 M5 2.35 10 (5.3) 3.5 2 3.527P5 A1/r, A2/t M5 2.35 14 (2.1) 2 2 2M4 1.2 − 2.0 10 (5.3) 3.5 2 3.5P/¨, N/© M6 × 2 2.94 (*1)2011 R/L1, S/L2, T/L3 M6 3.4 − 4.9 8 (8.4) 8 3.5 82011 A1/r, A2/t M4 1.2 − 2.0 14 (2.1) 2 2 2M6 3.4 − 4.9 8 (8.4) 5.5 3.5 5.5P/¨, N/© M6 × 2 2.94 (*1)2015 R/L1, S/L2, T/L3 M6 3.4 − 4.9 6 (13.3) 14 5.5 142015 A1/r, A2/t M4 1.2 − 2.0 14 (2.1) 2 2 2M6 3.4 − 4.9 8 (8.4) 8 5.5 5.5P/¨, N/© M6 × 2 2.94 (*1)2018 R/L1, S/L2, T/L3 M6 3.4 − 4.9 4 (21.2) 22 8 222018 A1/r, A2/t M4 1.2 − 2.0 14 (2.1) 2 2 2M6 3.4 − 4.9 6 (13.3) 8 5.5 8P/¨, N/© M6 × 2 2.94 (*1)2022 R/L1, S/L2, T/L3 M6 3.4 − 4.9 4 (21.2) 22 14 222022 A1/r, A2/t M4 1.2 − 2.0 14 (2.1) 2 2 2M6 3.4 − 4.9 6 (13.3) 14 8 8P/¨, N/© M6 × 2 2.94 (*1)2030 R/L1, S/L2, T/L3 M8 7.8 − 9.8 2 (33.6) 38 2.2 382030 A1/r, A2/t M4 1.2 − 2.0 14 (2.1) 2 2 2M8 7.8 − 9.8 6 (13.3) 14 8 14P/¨, N/© M6 × 4 2.94 (*1)2037 R/L1, S/L2, T/L3 M10 14.7 − 19.6 1/0 (53.5) 50 30 602037 A1/r, A2/t M4 1.2 − 2.0 14 (2.1) 2 2 2M8 7.8 − 9.8 4 (21.2) 22 14 142011 to 2037 A11/r1, A21/t1 (*2) M4 1.2 − 2.0 14 (2.1) 2 2 2* 1. Connect using exclusive-use connection bus bar.* 2. Provided for open chassis type with a minimum capacity of 11 kW. Not provided for external heatsink cooling type.3
