14.3 Options and Peripheral Units14 -55J Digital Operator AppearanceThe appearance of the Digital Operator is shown in the following diagram.LOCALREMOTEDIGITAL OPERATORJVOP-132DSPLDATAENTERJOGFWDREV RESETRUN STOPDRIVE FWD REV REMOTE REFSEQDRIVEPRGMJOGDRIVE FWD REV REMOTEREFSEQJVOP-132Mode indicatorsDisplay panelKeypad (displayselection keys, etc.)Fig 14.20 Digital Operator Display Panel and Operation KeysJ Mounting the Digital Operator to the PanelThe following three methods can be used to mount the Digital Operator to a control panel. Mount the Digi-tal Operator in accordance with the application.Table 14.24 Mounting Method FeaturesItem Method 1 Method 2 *1 Method 3 *1 RemarksEase of mounting(Extent of panelExcellent Good Some difficulty ---(Extent of panelmanipulation) 3 screw holes 3 screw holes 5 screw holesEase of removal(Removal from theSome difficulty Some difficulty Excellent Method 3 enablesthe Digital Operator(Removal from thepanel) Fixed permanently Fixed permanently Can be mounted andremoved freelythe Digital Operatorto be mounted andremoved freely.Applicable loca-tionSome difficulty Good Some difficulty ---tion(Dusty locations,etc.) --- *2 ---Additional partscode number--- DACT32183-AD DACT32183-BD ---* 1. Mounting methods 2 and 3 require additional parts such as metal plates or resin.* 2. If mounting the Digital Operator in a dusty location or similar, mount packaging or anotherbuffer between the panel and the Digital Operator.14
