STARTUPCarl Zeiss Mounting the Standard Components Axio Scope.A132 M60-2-0007 e 05/08How to insert eyepiece graticulesThe eyepieces PL 10x/23 Br. foc. are designed to beused with eyepiece graticules.The slight image shift caused by the added glass isreversed when the zero position is marked by thered dot (302H302HFig. 3-5/R) and not the white one (303H303HFig.3-5/W).The eyepiece graticules (3 0 4 H 3 0 4 H Fig. 3-5/3) are glued intoscrew-in lens parts (3 0 5 H 3 0 5 H Fig. 3-5/4) and can thus bechanged easily. Complete lens parts with glued-ingraticules can be ordered from Zeiss.How to change a lens part:• Unscrew the lens part (306H306HFig. 3-5/4) with theeyepiece graticule (307H307HFig. 3-5/3) and remove it.Then insert the new lens part with the eyepiecegraticule.If you want to add your own eyepiece graticule to the lens part after removing it, make surethat the writing is face down before screwing the lens part back in.How to insert eye guardsThe eyepieces are furnished with protective rubber rings to protect spectacles from being scratched.These rubber rings can be replaced by eye guards.• Pull the rubber rings (3 0 8 H 3 0 8 H Fig. 3-5/2) from the eyepieces, then insert the eye guards(3 0 9 H 3 0 9 H Fig. 3-5/1) instead.If you find the rubber rings hard to remove from the eyepiece slots, try using a blunt stick to press themout.Fig. 3-5 Inserting an eyepiece graticule
