STARTUPAxio Scope.A1 Mounting Optional Components Carl ZeissM60-2-0007 e 05/08 633.4.9 Changing the LED Module in theUpper Stand Part FL-LED• Lift the covering caps (576H576HFig. 3-49/1) off the upperstand part.• Remove the connecting plug (577H577HFig. 3-49/3) of theLED module to be changed (578H578HFig. 3-49/2) fromthe corresponding slot (579H579HFig. 3-49/4) and pull theLED module out of its socket.• Put the new LED module into the socket andplug the cable into the corresponding slot. Noadjustment is necessary.• As the LED circuit is coupled to the reflectorturret, it is necessary to make sure that LEDmodule and fluorescence filters on thecorresponding reflector turret position arecompatible.For better orientation, the positions of the LEDmodule and those in the reflector turret arenumbered.• Replace the covers.When you insert LED modules orfluorescence filters, make sure that theymatch spectrally. This guarantees thatthe correct LED is switched on when thereflector turret is rotated. Fig. 3-49 Changing the LED module
