STARTUPAxio Scope.A1 Mounting Optional Components Carl ZeissM60-2-0007 e 05/08 573.4.2 Mounting the Intermediate Platefor Analyzer Slider• Loosen the hexagon socket screw (5 1 2 H 5 1 2 H Fig. 3-40/5)with the ball head screwdriver SW 3 and lift offthe tube (513H513HFig. 3-40/1).• Use the included ring tool to unscrew the tubelens (accessible from the bottom) and keep itfree of dust.• Screw the tube lens included with theintermediate plate into the tube.• Insert the intermediate plate (514H514HFig. 3-40/2) withthe dovetail ring into the stand socket(5 1 5 H 5 1 5 H Fig. 3-40/6), adjust it, then fixate it with thehexagon socket screw (5 1 6 H 5 1 6 H Fig. 3-40/4).• Insert the analyzer slider into the sliderreceptacle (517H517HFig. 3-40/3) if applicable.• Slightly incline the binocular tube (518H518HFig. 3-40/1)when inserting it into the intermediate plate,adjust it and fixate it with the hexagon socketscrew (5 1 9 H 5 1 9 H Fig. 3-40/4).3.4.3 Mounting the Tube Lens TurretMounting the tube lens turret is done analogically to mounting the intermediate plate for analyzer sliders.See chapter 5 2 0 H 5 2 0 H 3.4.3.Before using the TL turret, please remove the tube lens from the tube. Only in combinationwith imager tubes and eyepieces SF23 (see Systems Overview).Fig. 3-40 Mounting the binocular tube