CLI Commands B-13DIALdial Generates an outgoing connection to the location specified by the vc name. Youcan use list vcs to list the defined vc profiles, and their current status.DISABLEdisable access Disables the Access List feature. When disabled, all hosts are permitted to accessthe Router’s management services.disable bridge networkDisables the bridge network you previously defined using the add bridge networkcommand. You can see which bridge networks are currently running using listbridge forwarding.disable bridgespanning_treeDisables use of the spanning tree algorithm on bridge networks. The spanningtree algorithm is required if there is more than one bridge between the same twoLAN segments. You can use list bridge forwarding to see which bridges aredefined, and show bridge network settings to see which options are enabled on aparticular bridge network.disable commandpasswordDisables the console password feature.disable icmp Disables the Internet Control Message Protocol.disable interfaceDisables the specified interface. A disabled interface remains in the interface table,but will not transmit or receive any data. Use list interfaces to see the currentlydefined interfaces, and their status.disable ip forwarding Causes the system to stop forwarding any packets over IP networks.disable ip networkDisables the specified IP network. Make sure there is no activity on this networkbefore disabling it.disable ip rip Disables the RIP routing algorithm on all IP networks. You can use show ip routingto see the current status of IP routing. This saves system space by preventing alarge RIP database, which is useful for networks connecting over the WANinterface.disable ip routing Disables all routing protocols on all IP networks. Currently, the only routingprotocol is RIP, which means that disable ip rip performs the same function. Useshow ip routing to see the current status of IP routing.disable ipstatic_remote_routesDisables all statically defined remote routes on all IP networks, that you previouslydefined using add ip route. You can list the current IP routes using list ip routes.disable ipx networkDisables the specified IPX network. Use list ipx networks to see which IPXnetworks are defined, and their current status.
