CLI Commands B-51show ppp on vc countersThis shows counters for the Point-to-Point Protocol on the Virtual Circuit.show ppp on vc settingsThis shows the settings for the Point-to-Point Protocol on the Virtual Circuit.show ppp on interface countersDisplays statistics for PPP running on the specified interface.COUNTERS for PPP BUNDLE 1 Operational Status - not opened or opened Number Active Links - sum of active links using this PPP bundle Transmit Packets - sum of packets transmitted over this bundle Bytes from Upper Layer - sum of bytes received from an upper layerapplication for transmission over this bundle. This counter represents alldata handed down to the PPP application BEFORE compression occurs. Bytes to Lower Layer - sum of bytes sent to a lower layer application fortransmission over this bundle. This counter represents all data to be handeddown to the lower layer application AFTER compression occurs. Received Packets - sum of packets received from a lower layer applicationover this bundle Bytes to Upper Layer - sum of bytes to be handed up to an upper layerapplication over this bundle Bytes from Lower Layer - sum of bytes received from a lower layerapplication over this bundle Total Bad Headers - sum of packets with incorrect PPP Header (Address,Control, PID Field)COUNTERS for PPP LINK 1 - 5 Operational Status - not opened or opened Received Packets - too long Transmit Frames - sum of frames received from the PPP application fortransmission over this link Bytes from Upper Layer - sum of bytes handed down from an upper layerapplication for this link Bytes to Lower Layer - sum of bytes received from a lower layerapplication for this link Received Frames - sum of frames received on this link Bytes to Upper Layer - sum of bytes handed up to an upper layerapplication over this link Bytes from Lower Layer -sum of bytes received from a lower layerapplication over this linkshow ppp on interface settingsDisplays the settings for PPP on the specified WAN interface.
