B-52 APPENDIX B: CLI COMMAND DESCRIPTIONSETTINGS for PPP BUNDLE 1 Operational Status - opened or not opened Number Active Links - number of links active on this PPP bundle User Profile - user whose parameters were used in creating links Local MMRU - MRU the remote entity uses when sending packets to localPPP entity. Default: 1514 Remote MMRU - MRU the local entity uses when sending packets toremote PPP entity. Default: 1514 Local Endpoint Class - type of address used as the identifier Local Endpoint Length - maximum length of the local EndpointDiscriminator Address, default is 6 Local Endpoint ID - value of the local Endpoint Discriminator Address Remote Endpoint Class - value of the remote Endpoint DiscriminatorClass, which indicates the type of address being used as the identifier Remote Endpoint Length - maximum length of the remote EndpointDiscriminator Address Remote Endpoint ID - value of the remote Endpoint Discriminator AddressSETTINGS for PPP BUNDLE 1 COMPRESSIONOperational Status - Opened or Not Opened Compression Protocol - authentication protocol used by the local PPPentity when it authenticated the local PPP entity to the remote PPP entity:PAP, CHAP or NONESETTINGS for PPP LINK 1 - 5 Operational Status - opened or not opened Interface Index - index number of the interface used Local MRU - MRU the remote entity uses when sending packets to localPPP entity. Default: 1514 Remote MRU - MRU the local entity uses when sending packets to remotePPP entity, default is 1514 Local to Peer ACC Map - value of the ACC Map used for sending packetsfrom the local PPP entity to the remote PPP entity Peer to Local ACC Map - ACC Map used by the remote PPP entity whentransmitting packets to the local PPP entity Local To Remote Protocol Compression - Indicates whether the local PPPentity will use Protocol Compression when sending packets to the remotePPP entity. Default: ENABLED. Remote To Local Protocol Compression - Indicates whether the remotePPP entity will use Protocol Compression when transmitting packets to thelocal PPP entity. Default: ENABLED. Local To Remote ACC Compression - Indicates whether the local PPPentity will use Address and Control Compression when sending packets tothe remote PPP entity. Default: ENABLED.
