B-54 APPENDIX B: CLI COMMAND DESCRIPTION Total Set MIB Objects - sum of MIB objects altered successfully as theresult of receiving valid SNMP Set-Request PDUs Get Request PDUs - sum of SNMP Get-Request PDUs accepted andprocessed Get Next Request PDUs - sum of SNMP Get-Next PDUs accepted andprocessed Set Request PDUs - sum of SNMP Get-Next PDUs accepted and processed Get Response PDUs - sum of SNMP Get-Response PDUs accepted andprocessed Trap PDUs - sum of SNMP Trap PDUs accepted and processedOUTPUT COUNTERS Packets - sum of SNMP packets transmitted Too Big Errors - sum of SNMP PDUs generated by SNMP and for which thevalue of the error-status field is `tooBig’ No Such Name Errors - sum of SNMP PDUs generated by SNMP and forwhich the value of the error-status field is `noSuchName' Bad Value Errors - sum of SNMP PDUs generated by SNMP and for whichthe value of the error-status field is `badValue' General Errors - sum of SNMP PDUs generated by SNMP and for which thevalue of the error-status field is `genErr' Get Request PDUs - sum of SNMP Get-Request PDUs sent from SNMP Get Next Request PDUs - sum of SNMP Get-Next PDUs sent from SNMP Set Request PDUs - sum of SNMP Set-Request PDUs sent from SNMP Get Response PDUs - sum of SNMP Get-Response PDUs from SNMP Trap PDUs - sum of SNMP Trap PDUs sent from SNMPshow snmp settings Displays SNMP settings, which you can modify using enable or disable snmpauthentication traps commands. Authentication Traps - ENABLED (default) or DISABLEDshow system Displays system information. System Descriptor - for example:3Com OfficeConnect™ Remote 812 V1.0.0, Built on Oct 31 1998 at11:33:05. Object ID - identifies this system to SNMP managers System UpTime - time the system has been running since last boot System Contact - modify using set system System Name - modify using set system System Location - modify using set system System Services - for example, Internet End To End Applications System Version - loaded version of the system software
