CLI Commands B-39Sets ATM parameters for VCs.SHOW Show commands display details about system entities.show access Displays the current status of the access list feature. Administration Status - Indicates status of the access list feature. Optionsare Enabled or Disabled. LAN Access - Indicates whether all frames received on the LAN interfaceare subject to access list checking. Number of Frames Blocked - Number of frames silently discarded becausethe Remote Host’s subnet was not on the access list.show atm status Displays current statistics for the ATM protocol running over the ADSL WANinterface. It lists: Cell Delineation - Whether or not cell delineation is currently achieved. ILMI VPI - ILMI Path Identifier used for obtaining dynamic VC’s (Notsupported in OfficeConnect Remote 812 1.0). ILMI VCI - ILMI Channel Identifier used for obtaining dynamic VC’s (Notsupported in OfficeConnect Remote 812 1.0). TX Cells - Number of ATM data cells sent over the WAN. TX Idle Cells - Number of ATM idle cells sent over the WAN. RX Good Cells - Number of well-formed and correctly addressed ATM datacells received from the WAN. RX Idle Cells - Number of well-formed and correctly addressed ATM idlecells received from the WAN. RX No Pkt Avail - Number of times a packet was reassembled but couldnot be delivered over the LAN because of lack of packet memory within theOCR 812. RX Bad VPI or VCI - Number of ATM cells received with a bad or inactiveVPI and/or VCI number. RX Bad HEC - Number of ATM cells received with a bad ATM header. RX Queue Full - Number of times a packet was dropped because the RXqueue was full.Parameter Description VC profile name.Bt Burst Tolerance (VBR only).Category_of_service Select either Unspecified (UBR) or Variable (VBR).Pcr Peak Cell Rate (both UBR and VBR).Scr Sustained Cell Rate (VBR only).Type This designated a virtual circuit as either a Switched Virtual Circuit (SVC)or a Permanent Virtual Circuit (PVC).Vci Virtual Channel Identifier.Vpi Virtual Path Identifier.
