CLI Quick Setup Script 4-7Sample Output Display as Quick Setup ExecutesOCR-DSL> set system name "name"OCR-DSL>set system location "vienna"OCR-DSL>set system contact "jc"OCR-DSL>enable command password “password”OCR-DSL>add snmp community public address 0.0.0.0 access RWOCR-DSL>enable security_option remote_user administrationOCR-DSL>add user "root" password "!root"OCR-DSL>add ip network “test” interface eth:1 address 192.168.200.254/Cframe ethernet_ii enable noOCR-DSL>set dhcp mode serverOCR-DSL>set dhcp server start 192.168.200.1 end 192.168.200.40 router192.168.200.254 dnsl 192.168.200.254 dns2 0.0.0.0 wins1 0.0.0. wins2 0.0.0.0mask 255.255.255.0OCR-DSL>add dns host ocrdsl-3com.com addr 192.168.200.254OCR-DSL>enable dnsOCR-DSL>add tftp client 0.0.0.0OCR-DSL>set ip network “test” routing ripv2OCR-DSL>enable ip network “test”OCR-DSL>enable ip forwardingOCR-DSL>add ipx network “ipx” address 12345661 interface eth:1 frame“ethernet_ii”OCR-DSL>disable bridge spanning_treeOCR-DSL>add bridge network “bridge”OCR-DSL>save allSaving..... SAVE ALLSAVE ALL CompleteOCR-DSL>Spawned Process CFP 282002 /./QuickSetup.commands CompletedSuccessfullyQuick Setup (CLI) is designed only for initial set up of the OCR 812. When setup iscomplete, this one-time program will alter your configuration files (which theprogram cannot edit). If you make an error and need to restart, use the deleteconfiguration command to reboot and return to factory default settings.
