CLI Commands B-21 Type - STATIC or DYNAMIC network Network Address - address of the networklist processes Displays all processes running on the system. Index - a reference number in the process table Name - designation of the process (e.g.: Domain Name System) Type - SYSTEM, APPLICATION, FORWARDER or DRIVER Status - ACTIVE, PENDING or INACTIVElist ppp Displays PPP bundles and links. When multiple physical links are combined to runmultilink PPP (RFC1717), the group of physical links is called a bundle. With theOCR 812, only a single link is supported.This command displays: Bundle Index - index number of the physical interface in the bundle Link Index - index number in the list of links Oper Status - current operational status of the link Interface Name - designation of interface belonging to this bundlelist services Displays all network services you defined using the add network service command: Name - name of service Server Type - type of service. For example: tftp Socket - TCP port number used by the service Close - reveals whether all connections close when you disable this service:TRUE or FALSE. See add network service command for details. Admin Status - the status you have requested for this service: ENABLED orDISABLED. See the add network service command for details.list snmp communitiesor list snmptrap_communitiesThese commands display the defined SNMP communities, which you previouslydefined using the add snmp community command. SNMP trap_communities doesnot list access. Community Name - community designation for the IP address IP address - IP address of a member of the community Access (Read/Write) - type of access a member has to MIBslist syslog Displays IP addresses which get syslog entries from the system. See add syslog formore information, and delete syslog command to remove entries. This commandshows: Syslog - IP address to which syslog entries will be sent Log Level - reporting level of entries to send Msg Count - current number of messages sent since system bootupAlso see list facilities and set facilities commands, which let you view and changelog reporting levels for each system facility.