5 Q UICK VC SETUPThis chapter will describe in detail the operations of the OCR 812 QuickVC SetupWizard program. It will identify the required information, steps involved, andsample output scripts from the execution of this program.CLI QuickVC SetupScriptIntroduction The CLI QuickVC Setup program allows you to quickly configure remote siteprofiles (virtual channel connections) for your OCR 812. Instead of using crypticcommands you will simply respond to a series of questions regarding differentaspects of your configuration. The program will convert your responses into theappropriate CLI commands and execute them.The OCR 812 can be configured as an ATM device. Depending on the presentconfiguration, the QuickVC script will prompt you for the appropriate parameters.Instructions This section contains the CLI QuickVC Setup script for all possible OCR 812 VirtualChannel (VC) configurations. You will be required to enter information concerningnetwork configurations. Questions in the CLI QuickVC Setup script are presentedhere in tables.Write the appropriate information for your desired configuration in the followingtables.Starting QuickVC Setup OCR-DSL> quickvcWelcome to the OCR 812 QuickVC Setup WizardThe VC Setup Wizard allows you to add and configure a VC profile on your OCR812. Each profile must have a unique name.ATM Parameters The characteristics of the ATM Virtual Circuit must be configured.Question Default Your SystemWhat is the name to be added ? [ ]Question Default Your SystemEnter the Virtual Path Identifier [0]Enter the Virtual Channel Identifier [0]Is the Category of Service (U)br or (C)br ? [U]Enter the Peak Cell Rate: [0]
