CLI Commands B-43show dhcp relay Displays the current configuration and counters for both the primary andsecondary DHCP relay server. IP Address - IP address of the DHCP Server. Max Hops - maximum hops to get to this server. Status - enabled or disabled. Request Sent to Server - number of requests sent to server. Responses Received from Server - number of responses received fromthe server. Responses Received with Error - number of responses received that werein error.show dhcp servercountersDisplays various counters for the DHCP Server. Lease Requests Received Lease Accepts Received Lease Renewals Received Lease Refusals Received Lease Releases Received Unrecognized Packets Received Lease Offers Transmitted Lease Confirmations Transmitted Renewal Refusals Transmitted Lease Confirmations Transmitted Requested Address Out of Range Requested Address In Use No Free Addressesshow dhcp serversettingsDisplays the current settings for the DHCP Server. Status - Whether DHCP Server is active. Start IP Address - First IP address in the pool of IP addresses that will behanded out through DHCP. End IP Address - Last IP address in the pool of IP addresses that will behanded out through DHCP. IP Mask - IP network mask that applies to the pool of IP addresses beingadministered. IP Router - IP address that the workstations should use as their defaultgateway. Lease - The number of seconds that an IP address will be allocated to aworkstation without having to be renewed. Host Name - DNS host name of this unit. Domain Name - Name of the DNS domain we exist in.
