|
System Administration 6-43Displaying Date, Time,and System UptimeTo display current date, current time, and system uptime (time elapsed sincepower-on), use the command show date.Date and time information displays in the following format:System Date: 02-MAR-1998 05:17:00System UpTime: 2d 08:37:54Setting SystemIdentificationThe system name, location and contact information is useful when monitoring theOCR 812 remotely. You should choose a name, location and contact that isappropriate for the unit. You can view the settings using the command:show system. To set these parameters use the command:set system name location contact The name, location, and contact can be up to 32 characters long. For example,set system name OCR1 location Rack4 contact SysAdmin@555-1212You must assign a system name to the OCR 812 using the SET SYSTEM NAME command. If you do not assign a system name, the unit may rebootduring PPP operation.Configuring WebBrowser and TELNETLogin AccessSetting up a login user allows you to provide controlled access to the OCR 812from a Web browser or through TELNET. Connecting with a Web browser allowsyou to configure and monitor your unit using the OCR 812 Manager. Connectingusing TELNET on a workstation allows you to remotely manage the unit using CLI.A default user name of root and password !root are provided by DHCP SmartMode and the IP Wizard during the initial installation. For secure access, youshould add a private login name and password and delete the default name. To view the current login users, use the command:list users To add a login user, use the command:add user password The name can be up to 32 characters long and the password can be up to 15characters long. To delete a login user, use the command:delete user To change the password, use the command:set user password To enable the use of CLI for TELNET users, issue the additional command:enable security_option remote_user administration
|
