viSSample Configuration A -1ScriptsCLIdo (run CLI script) B -14SecurityCLI Accessdisable security_option remote_user administration B -14enable security_option remote_user administration B -16Dial-indisable user B -14enable user B -16TELNETdisable telnet escape B -14enable telnet escape B -16Virtual Channeldisable VC B -14enable VC B -16Set command 2 -2, 4 -2, 4 -4, 4 -7Setting Filter Access Using CLI 6 -56SIP phone (using with an OfficeConnect Remote 812)Must be installed on LAN side of 812 6 -26Network infrastructure (LAN, 812, WAN, Proxy Server, Voice Gateway) 6 -26Overview 6 -26PAT must be enabled 6 -26SNMP 4 -3add snmp community B -9add snmp trap_community B -9delete snmp community B -12delete snmp trap_community B -12disable link_traps interface B -14disable security_option snmp user_access B -14disable snmp authentication traps B -14enable link_traps interface B -16enable security_option snmp user_access B -16enable snmp authentication traps B -16list snmp communities B -21System AdministrationOverview 6 -39System Commands (selected)add framed_route tunnel B -3add framed_route vc B -3add tunnel B -9delete configuration B -10delete file B -11delete framed route vc B -11delete syslog B -12delete tunnel B -12disable tunnel B -14do (run a script file) B -14enable tunnel B -16help B -17history B -17kill B -17list facilities B -18list files B -18list processes B -21list tunnel B -22quickvc B -23reboot B -23rename file B -23set tunnel B -33show configuration B -42show tunnel B -55System ID 6 -42
