Function blockSRMEMORYSETRESETOUTNOUTIEC09000293-1-en.vsdIEC09000293 V1 ENFigure 176: SRMEMORY function blockSignalsTable 302:SRMEMORY Input signalsName Type Default DescriptionSET BOOLEAN 0 Input signal to setRESET BOOLEAN 0 Input signal to resetTable 303:SRMEMORY Output signalsName Type DescriptionOUT BOOLEAN Output signalNOUT BOOLEAN Inverted output signalSettingsTable 304:SRMEMORY Group settings (basic)Name Values (Range) Unit Step Default DescriptionMemory OffOn- - On Operating mode of the memory function13.3.1.11 Reset-set with memory function block RSMEMORYIdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberReset-set with memory function block RSMEMORY - -FunctionalityThe Reset-set with memory function block (RSMEMORY) is a flip-flop with memorythat can reset or set an output from two inputs respectively. Each RSMEMORYfunction block has two outputs, where one is inverted. The memory setting controls ifthe flip-flop after a power interruption will return the state it had before or if it will bereset. For a Reset-Set flip-flop, RESET input has higher priority over SET input.Section 13 1MRK 504 135-UEN ALogic388Technical manual
