14.21.4 SettingsTable 422:I103EF Non group settings (basic)Name Values (Range) Unit Step Default DescriptionFunctionType 1 - 255 - 1 160 Function type (1-255)14.22 Function status fault protection for IEC 60870-5-103I103FLTPROT14.22.1 FunctionalityI103FLTPROT is used for fault indications in monitor direction. Each input on thefunction block is specific for a certain fault type and therefore must be connected to acorrespondent signal present in the configuration. For example: 68_TRGENrepresents the General Trip of the device, and therefore must be connected to thegeneral trip signal SMPPTRC_TRIP or equivalent.The delay observed in the protocol is the time difference in between the signal that istriggering the Disturbance Recorder and the respective configured signal to the IEC60870-5-103 I103FLTPROT.1MRK 504 135-UEN A Section 14Monitoring517Technical manual
