Name Values (Range) Unit Step Default DescriptionUnderTrigLe09 0 - 200 % 1 50 Under trigger level for analog channel 9 in % ofsignalOverTrigOp09 DisabledEnabled- - Disabled Use over level trigger for analog channel 9 (on)or not (off)OverTrigLe09 0 - 5000 % 1 200 Over trigger level for analog channel 9 in % ofsignalNomValue10 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 10UnderTrigOp10 DisabledEnabled- - Disabled Use under level trigger for analog channel 10(on) or not (off)UnderTrigLe10 0 - 200 % 1 50 Under trigger level for analog channel 10 in %of signalOverTrigOp10 DisabledEnabled- - Disabled Use over level trigger for analog channel 10(on) or not (off)OverTrigLe10 0 - 5000 % 1 200 Over trigger level for analog channel 10 in % ofsignal14.4.4 Analog input signals A4RADR14.4.4.1 IdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberAnalog input signals A4RADR - -14.4.4.2 Function blockA4RADR^INPUT31^INPUT32^INPUT33^INPUT34^INPUT35^INPUT36^INPUT37^INPUT38^INPUT39^INPUT40IEC09000350-1-en.vsdIEC09000350 V1 ENFigure 252: A4RADR function block, derived analog inputsChannels 31-40 are not shown in LHMI. They are used for internallycalculated analog signals.Section 14 1MRK 502 048-UUS AMonitoring556Technical manual
