14.13.3 Function blockMVEXPRANGE* HIGHHIGHHIGHNORMALLOWLOWLOWIEC09000215-1-en.vsdIEC09000215 V1 ENFigure 259: MVEXP function block14.13.4 SignalsTable 411:MVEXP Input signalsName Type Default DescriptionRANGE INTEGER 0 Measured value rangeTable 412:MVEXP Output signalsName Type DescriptionHIGHHIGH BOOLEAN Measured value is above high-high limitHIGH BOOLEAN Measured value is between high and high-high limitNORMAL BOOLEAN Measured value is between high and low limitLOW BOOLEAN Measured value is between low and low-low limitLOWLOW BOOLEAN Measured value is below low-low limit14.13.5 SettingsThe function does not have any parameters available in Local HMI or Protection andControl IED Manager (PCM600).GlobalBaseSel: Selects the global base value group used by the function to define (IBase),(VBase) and (SBase).14.13.6 Operation principleThe input signal must be connected to a range output of a measuring function block(CVMMXN, CMMXU, VMMXU, VNMMXU, CMSQI, VMSQ or MVGGIO). Thefunction block converts the input integer value to five binary output signals according totable 413.Section 14 1MRK 502 048-UUS AMonitoring592Technical manual
