14.23 IED status for IEC 60870-5-103 I103IED14.23.1 FunctionalityI103IED is a function block with defined IED functions in monitor direction. This blockuses parameter as FunctionType, and information number parameter is defined for eachinput signal.14.23.2 Function blockI103IEDBLOCK19_LEDRS21_TESTM22_SETCH23_GRP124_GRP225_GRP326_GRP4IEC10000292-2-en.vsdIEC10000292 V2 ENFigure 281: I103IED function block14.23.3 SignalsTable 443:I103IED Input signalsName Type Default DescriptionBLOCK BOOLEAN 0 Block of status reporting19_LEDRS BOOLEAN 0 Information number 19, reset LEDs21_TESTM BOOLEAN 0 Information number 21, test mode is active22_SETCH BOOLEAN 0 Information number 22, setting changed23_GRP1 BOOLEAN 0 Information number 23, setting group 1 is active24_GRP2 BOOLEAN 0 Information number 24, setting group 2 is active25_GRP3 BOOLEAN 0 Information number 25, setting group 3 is active26_GRP4 BOOLEAN 0 Information number 26, setting group 4 is active14.23.4 SettingsTable 444:I103IED Non group settings (basic)Name Values (Range) Unit Step Default DescriptionFunctionType 1 - 255 - 1 1 Function type (1-255)1MRK 502 048-UUS A Section 14Monitoring625Technical manual