16-12 SmartSwitch 1800 4.0 User Guide, Rev 01Configuring Bridge PortsA Bridge port is a SmartSwitch 1800 LAN interface or frame relay port that willoperate as a bridge connection to the LAN or WAN.Press [C] at the IP/LLC2/BRIDGE/IPX Interfaces Configuration Menu to display con-figured Bridge ports.Figure 16-4 Bridge Ports Display[A],[C],[E],[C] from Main MenuThese interfaces can be used for either LLC2 or Bridging. Also notethat the RLP column is irrelevant on the SmartSwitch 1800.To configure an interface, press [D] at the IP/LLC2/BRIDGE/IPX Interfaces Config-uration Menu. When prompted for an Interface Number (which is merely a sequentialnumber to identify the interface):l If modifying an existing record, enter the interface number: 0–95.Do not configure more than one interface per DLCI on a port.l If creating a new record, press [Enter], which will automatically specify the nextavailable sequential interface number.The display depends on the interface; the following figure shows an example, andTable 16-8 lists the parameters for all interface types.Node N ame=nod e_xyzReview Brid ge Ports/LLC2 In terfaces-------------------------------------------------------------------------------------------------------In terface Numb er Type RLP Port DLC I Format-------------------------------------------------------------------------------------------------------0 Ethernet1 Frame Relay 0 1 30 Native LLC-22 Frame Relay 0 1 31 8025_SRB3 Frame Relay 0 1 32 8025_SRB4 Frame Relay 0 1 33 8023_TBPgUp, PgD n, F3:Exit, F9:Stop Remote, F10:Ab ort
