20-2 SmartSwitch 1800 4.0 User Guide, Rev 01Displaying Port StatusPress [B] at the Status Displays Menu to display the status of all serial lines on thisnode (LAN port status is not displayed).Figure 20-2 Port Status Display[C],[B] from Main MenuInformation in this Display:l P – is the port number.l Type – is the port type:FRL = Frame relay X25 = X.25 SNA = SNABSI = BSC Interactive BSI = BSC Batch ASY = Async PADVCE = Voice LOG = Logical Eth = Ethernet.l PPS – is packets per second passing through the port.l Conn# – is the number of virtual connections currently in use.l State for non-Voice ports:Linkup – The necessary level 1 modem signals are present, and the level 2link is up. (For frame relay PVCs, this state means that LMI is running.)Restarting – Level 2 is up and level 3 is starting its initial handshakesequence.Operational – The line is up and ready to establish a connection or transferdata. On a frame relay logical DTE port with link layer management con-figured, this state means that the port has received a Full Status Responsefrom the DCE (frame relay switch), as a result of a Full Status Enquiry sentby the SmartSwitch 1800.On a frame relay logical DCE port, this state means that the port has receiveda Full Status Enquiry from the attached DTE.Node N ame=nod e_xyzPort Statu s Display (Page 1)P Typ e PPS Conn # State P Type PPS Conn # State0 FRL 62 4 Operational 1 SNA 127 12 Operational2 FRL 112 7 Operational 3 SNA 60 6 Operational4 V CE 10 1 On_Hook 5 VCE 20 1 On_Hook0 Eth ernetF1: Login
