If your vehicle is equipped with the Navigation system,do the following:1. Press the MAIN button located to the lower left ofthe display.2. Press the multi-function button next to the Setupprompt at the right of the display.3. Press the multi-function button next to Prog SWClocated at the right of the screen.4. Turn the TUNE/SEL knob to scroll through theavailable functions.5. Once the function desired is highlighted, press andhold the multi-function button next to the control youwish to program (1, 2, 3 or 4). The buttons arelocated at the right of the display.When a control is successfully programmed, thefunction you selected will appear next to the numberof the control at the right of the display.6. Press the multi-function button next to the Backprompt to exit each menu. If you desire to programanother control, repeat the procedure.Each function can only be used once. When you programa control with a function, that function is removed from thelist of functions available. It will return to the list if youremove it from the SWC it is programmed to byprogramming another function to that control.Turn Signal/Multifunction LeverThe lever on the left side of the steering columnincludes the following:• Turn and Lane-Change Signals• Headlamps• Headlamp High/Low Beam-Changer• Flash-To-Pass Feature• Fog Lamps• Cruise ControlFor more information on the exterior lamps,seeExterior Lamps on page 3-20.3-9
