Finding a StationBAND: Press this button to select FM1, FM2, or AM, orXM1 or XM2 (48 contiguous US states, if equipped).Q SEEK R: Press the up or the down arrow to seekto the next or to the previous station and stay there.SEEK will appear on the display. The sound will mutewhile seeking.The radio will seek only to stations that are in theselected band and only to those with a strong signal.Q SCAN R: Press the SCAN button to enterscan mode. SCAN will appear on the display. Press theup arrow to scan to the next station. The radio will goto a station, play for 5 seconds, then go on to thenext station. Press this button again to stop scanning.To scan preset stations, press and hold SCAN for morethan two seconds until you hear a beep and PSCANappears on the display. The radio will go to thefirst preset station stored on your pushbuttons, play for5 seconds, then go on to the next preset station.Press SCAN again to stop scanning presets.The radio will scan only to stations that are in theselected band and only to those with a strong signal.LOCAL/DISTANT Selection: With this feature you canset the radio to search for local stations or stations thatare further away for a larger selection. To set this featureto LOCAL or DISTANT, perform the following steps:1. Press the TUNE/SEL knob to enter the main menu.2. Turn the TUNE/SEL knob until SEEK LOCAL orSEEK DISTANT appears on the display.3. Press the TUNE/SEL knob to select either LOCALor DISTANT.4. Press the CLR button to exit the display. To returnto the original display, repeatedly press the CLRbutton or wait for the display to time out.To search for stations, press the SEEK up or downarrows. If the system is set to LOCAL, SEEK will appearin the display and seek to stations with strong signalsonly. If the system is set to DISTANT, D-SEEK willappear in the display and seek to stations with weak andstrong signals.3-103