CAUTION: (Continued)Make sure that a LATCH-type child restraint isproperly installed using the anchorage points,or use the vehicle’s safety belts to secure therestraint. See “Securing a Child RestraintDesigned for the LATCH System” or “Securinga Child Restraint in a Rear Seat Position” inthe Index for information on how to secure achild restraint in your vehicle.Securing a Child Restraint Designedfor the LATCH System1. Find the anchors for the seating position you wantto use, where the bottom of the seatback meets theback of the seat cushion.2. Put the child restraint on the seat.3. Attach the anchor points on the child restraint to theanchors in the vehicle. The child restraintinstructions will show you how.4. If the child restraint is forward-facing, attach the topstrap to the top strap anchor. SeeTop Strap onpage 1-39. Tighten the top strap according tothe child restraint instructions.5. Push and pull the child restraint in differentdirections to be sure it is secure.To remove the child restraint, simply unhook the topstrap from the top tether anchor and then disconnect theanchor points.1-43
