To program the vehicle to a different mode, use thefollowing procedure:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previously under“Entering the Personal Settings Menu.”2. Turn the tune/select knob until AUTO EXIT SEAT ishighlighted.3. Press the tune/select knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear in the box next to the feature name.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.AUTO EXIT COLUMNIf your vehicle has the optional memory package, youwill have this feature. When this feature is turned on, youcan recall any previously programmed exit position forthe steering column when the vehicle is off, the shiftlever is in PARK (P), and the driver’s door is opened.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory, it wasprogrammed to Mode 2. The mode to which thevehicle was programmed may have been changed sinceit left the factory.To program the vehicle to a different mode, use thefollowing procedure:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previously under“Entering the Personal Settings Menu.”2. Turn the tune/select knob until AUTO EXITCOLUMN is highlighted.3. Press the tune/select knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear in the box next to the feature name.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.2-59
