• Your vehicle’s windshield is covered with ice, dirt,haze or other obstructions.• Your vehicle is loaded such that the front end of thevehicle points upward, causing the Intellibeam™sensor to aim high and not detect headlampsand taillamps.• You are driving on winding or hilly roads.You may need to manually disable or cancel thehigh-beam headlamps by turning the low-beamheadlamps on, if any of the above conditions exist.Disabling and Resetting Intellibeam™at the Rearview MirrorIntellibeam™ can be disabled and reset to the originalfactory setting by using the controls on the insiderearview mirror.AUTO 3 (Intellibeam™ On/Off): To disable thesystem, press this button on the inside rearview mirror.The Intellibeam™ indicator will turn off and the willnot come back on until the Intellibeam™ buttonis pressed again.When Intellibeam™ has turned on the high-beams, pullor push the high-beam stalk. This will disableIntellibeam™. The Intellibeam™ indicator on the mirrorwill turn off. To re-enable Intellibeam™, press theIntellibeam™ button on the mirror.A different sensitivity setting is available for dealerdiagnostics. This is done by pushing and holding thisbutton for 20 seconds until the light flashes three times.If you accidentally activate this, the vehicle’s settingwill automatically be reset each time the ignitionis turned off and then on again; otherwise, refer to thetext above for resetting the system.Cleaning the Intellibeam™ Light SensorThe light sensor is locatedon the inside of the vehiclein front of the insiderearview mirror.Clean the light sensor window, periodically, using glasscleaner on a soft cloth. Gently wipe the sensorwindow. Do not spray glass cleaner directly on thesurface of the sensor window.3-34
