Securing a Child Restraint Designed forthe LATCH System{CAUTION:If a LATCH-type child restraint is not attachedto anchors, the restraint will not be able toprotect the child correctly. In a crash, thechild could be seriously injured or killed.Make sure that a LATCH-type child restraintis properly installed using the anchors, oruse the vehicle’s safety belts to secure therestraint, following the instructions that camewith that restraint, and also the instructionsin this manual.{CAUTION:Each top tether anchor and lower anchor inthe vehicle is designed to hold only one childrestraint. Attaching more than one childrestraint to a single anchor could cause theanchor or attachment to come loose or evenbreak during a crash. A child or others couldbe injured if this happens. To help preventinjury to people and damage to your vehicle,attach only one child restraint per anchor.1. Find the lower anchors, if equipped, for the desiredseating position.2. If the desired seating position does not have loweranchors, see Securing a Child Restraint in a RearSeat Position on page 1-43 for instructions oninstalling the child restraint using the safety belts.3. Put the child restraint on the seat.4. Attach and tighten the lower attachments on thechild restraint to the lower anchors, if equipped,in the vehicle. The child restraint instructionswill show you how.1-41
