Notice: If the jumper cables are connected orremoved in the wrong order, electrical shorting mayoccur and damage the vehicle. The repairs wouldnot be covered by your warranty. Always connectand remove the jumper cables in the correctorder, making sure that the cables do not toucheach other or other metal.A. Heavy, Unpainted Metal Engine Part or RemoteNegative (−) TerminalB. Good Battery or Remote Positive (+) and RemoteNegative (−) TerminalsC. Dead Battery or Remote Positive (+) TerminalTo disconnect the jumper cables from both vehicles, dothe following:1. Disconnect the black negative (−) cable from thevehicle that had the dead battery.2. Disconnect the black negative (−) cable from thevehicle with the good battery.3. Disconnect the red positive (+) cable from thevehicle with the good battery.4. Disconnect the red positive (+) cable from theother vehicle.All-Wheel DriveIf your vehicle is equipped with all-wheel-drive, this is anadditional system that needs lubrication.Transfer CaseWhen to Check LubricantIt is not necessary to regularly check the transfer casefluid unless you suspect there is a leak or you hearan unusual noise. A fluid loss could indicate a problem.Have it inspected and repaired.Jumper Cable Removal5-51
