A LOCAL/DISTANT Selection: With this feature youcan set the radio to search for local stations orstations that are further away for a larger selection. Toset this feature to LOCAL or DISTANT, perform thefollowing steps:1. Press the tune/select knob to enter the main menu.2. Turn the tune/select knob until SEEK LOCAL orSEEK DISTANT appears on the display.3. Press the tune/select knob to select either LOCALor DISTANT.4. Press the BACK (F6) button to exit the display. Toreturn to the original display, repeatedly press theBACK (F6) button or wait for the display to time out.To search for stations, press the single arrow buttons. Ifthe system is set to LOCAL, SEEK will appear on thedisplay and seek to stations with strong signalsonly. If the system is set to DISTANT, D-SEEK willappear on the display and seek to stations with weakand strong signals.Setting Preset StationsUp to 30 stations (six FM1, six FM2, and six AM,six XM1 and six XM2 (if equipped)), can be programmedon the six numbered pushbuttons, by performing thefollowing steps:1. Turn the radio on.2. Press BAND to select FM1, FM2, or AM, or XM1or XM2.3. Tune in the desired station.4. Press and hold one of the six numberedpushbuttons for two seconds until you hear a beep.The set preset station number will appear on thedisplay above the pushbutton that it is set to.Whenever that numbered pushbutton is pressed forless than two seconds, the station that was setwill return.5. Repeat the steps for each pushbutton.To set the preset stations with an equalizationsetting, DSP setting, or a PTY setting, see each ofthese features later in this section. When apreset station is selected, once one of theseadditional settings is selected, the preset station willremember each setting and it will remain active,until the setting is selected off for that preset station.AUTOSTORE PRESETS: To set the preset stationsautomatically, perform the following steps:1. Turn the radio on.2. Press BAND to select FM1, FM2, or AM.3. Press the tune/select knob to enter the main menu.4. Turn the tune/select knob until AUTOSTOREPRESETS appears on the display.3-98
