Advanced Guide TroubleshootingContents > Preparing for Faxing > Specifying the Basic Settings for Faxing > Setting the Date and TimeSetting the Date and TimeNoteWhen the machine is connected to a computer with the MP Drivers installed, the date and timesetting will be copied from the computer to the machine. As long as the date and time are setaccurately on your computer, you do not need to set them on the machine.If you disconnect the power plug or when there is a power failure, the date and time setting on themachine will be reset. When you connect the machine to a computer with the MP Drivers installed,the setting may be copied to the machine once again.1. Display the Date/time setting screen.(1) Press the Menu button repeatedly to display Device settings.The Device settings menu will appear.(2) Use the (-) or (+) button to select Device user settings, and press the OKbutton.The Device user settings menu will appear.(3) Use the (-) or (+) button to select Date/time setting, and press the OKbutton.2. Enter the date and time.(1) Use the Numeric buttons to enter the date and time (in 24-hour format).Enter only the last two digits of the year.NoteIf you misentered the date and time, use the (-) or (+) button to move the cursorunder the wrong number, and reenter the correct number.(2) Press the OK button.NoteThe date display format can be selected from three formats: YYYY/MM/DD, MM/DD/YYYY,or DD/MM/YYYY (Date display format).3. Press the FAX button to return to the fax standby screen.Page topPage 21 of 973 pagesSetting the Date and Time
