ECM TXSends faxes in ECM (Error Correction Mode). When the recipient's fax machine is compatible withECM, the machine resends the fax after correcting errors automatically.Pause time settingsSets the length of time paused for each press of the Redial/Pause button when entering fax/telephone number.TX start speedSelects the fax sending speed.Color transmissionWhen faxing color documents using the ADF, the machine scans documents in black & white andsend them if the recipient's fax machine does not support color faxing.TX reportPrints a sending report automatically after the machine sends faxes. You can select Do not print,Print error only, or Print for each TX.Dial tone detectSets the machine to send a fax after checking for the dial tone when operations for outgoing andincoming calls are required simultaneously, thus preventing incorrect transmission.NoteThis setting may not be available depending on the country or region of purchase.Check RX fax infoChecks whether the dialed fax/telephone number and the sender information of recipient's faxmachine are the same. If not, stop sending faxes.Hook key settingSelects whether to enable or disable the Hook button on the machine to dial without picking up thehandset of the telephone when sending a fax.Page topPage 40 of 973 pagesUsing Various Sending Functions
