Advanced Guide > Troubleshooting > Error Message Appears on a PictBridge Compliant DeviceError Message Appears on a PictBridge Compliant DeviceThe following are the possible errors that may occur when printing directly from a PictBridge compliantdevice and the countermeasures to clear them.NoteThis section describes errors that are indicated on Canon-brand PictBridge compliant devices. Theerror messages and operations may vary depending on the device you are using. For errors on non-Canon PictBridge compliant devices, check the error message on the LCD and take theappropriate action to clear the error. For details, see An Error Message Is Displayed on the LCD .For the errors indicated on the PictBridge compliant device and their solution, also refer to theinstruction manual of the device. For other troubles on the device, contact the manufacturer.Error Message on the PictBridgeCompliant Device Action"Printer in use" If the machine is printing from the computer or warming up,wait until the job ends.When it is ready, the machine starts printing automatically."No paper" Load paper on the Rear Tray, and select Continue* in thedisplay on your PictBridge compliant device.* To resume printing, you can also press the OK button onthe machine instead of selecting Continue on the device."Paper Error" The Paper Output Tray is closed.Open the Paper Output Tray, then press the OK button on themachine."Paper jam" Select Stop in the display on your PictBridge compliantdevice to stop printing.Remove the jammed paper, load new paper, press the OKbutton on the machine, and try printing again."Printer cover open" Close the Scanning Unit (Cover) on the machine."No print head" The FINE Cartridge is not installed or the Cartridge may notbe compatible with this machine.Check: See Check inkU051/U052/U053/U059 in An ErrorMessage Is Displayed on the LCD and take the appropriateaction."Waste tank full"/"Ink absorber full" The ink absorber is nearly full.Check: See Contact service center in An Error Message IsDisplayed on the LCD and take the appropriate action."No ink"/"Ink cassette error" The FINE Cartridge has or may have run out of ink.The FINE Cartridge may not be installed properly or maynot be compatible with this machine.Check the error message on the LCD and take theappropriate action to resolve the error.An Error Message Is Displayed on the LCD"Hardware Error" FINE Cartridge errors have occurred.Replace the FINE Cartridge.Routine MaintenancePage topPage 861 of 973 pagesError Message Appears on a PictBridge Compliant Device
