Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > PictBridge settingsPictBridge settingsYou can change the print settings when printing from a PictBridge compliant device.Set the print settings to Default on the PictBridge compliant device when you want to print according tothe settings on the machine.See Settings on a PictBridge Compliant Device to change print settings from the PictBridge compliantdevice.Page sizeSelect the page size when printing directly from a PictBridge compliant device.When you perform PictBridge settings from the machine, set Paper size to Default on the PictBridgecompliant device.Media typeSelect the media type when printing directly from a PictBridge compliant device.When you perform PictBridge settings from the machine, set Paper type to Default on the PictBridgecompliant device.Print qualitySelect the print quality when printing directly from a PictBridge compliant device.Borderless printSelect bordered or borderless print.When you perform PictBridge settings from the machine, set Layout to Default on the PictBridgecompliant device.Auto photo fixWhen Manual correction is selected, the setting items below can be specified.VividMakes green and blue more lively.Photo optimizerAutomatically optimizes the brightness and tone of a photo.Noise reductionReduces the noise on blue areas like the sky as well as on black areas.Face brightenerBrightens a darkened face on a photo taken against the light.Red-Eye corr.Corrects red eyes in portraits caused by flash photography. This setting is also available whenAuto photo fix ON is selected.Depending on the type of the photo, red eyes may not be corrected or parts other than the eyesmay be corrected.Page topPage 798 of 973 pagesPictBridge settings