Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Printing Out NetworkSetting InformationPrinting Out Network Setting InformationYou can print out the network settings of the machine such as its IP address and SSID.ImportantThis print out contains valuable information about your computer. Handle it with care.1. Make sure that the machine is turned on.2. Load a sheet of A4 or Letter-sized plain paper in the Rear Tray.3. Press the Menu button repeatedly and select Device settings.4. Use the button to select LAN settings, then press the OK button.5. Use the button to select Print LAN details, then press the OK button.The following information on the machine's network setting is printed out.Item Explanations of the item SettingWireless LAN Wireless LAN Enable/DisableLink Status Status of the Wireless LAN Active/InactiveMAC Address MAC Address XX:XX:XX:XX:XX:XXSSID SSID SSID of the wireless LANConnection Mode Connection Mode InfrastructureChannel Channel XX (1 to 13)Encryption Method of the Encryption none/WEP/TKIP/AESWEP Key Length WEP Key Length Inactive/128/64Authentication Method of the Authentication auto/open/shared/WPA-PSK/WPA2-PSKSignal Strength Signal Strength 0 to 100 [%]TCP/IP Version TCP/IP Version IPv4/IPv6IP Address Selected IP Address XXX.XXX.XXX.XXXDefault Gateway Default Gateway XXX.XXX.XXX.XXXSubnet Mask*1 Subnet Mask XXX.XXX.XXX.XXXSubnet PrefixLength*2Subnet Prefix Length XXXIPsec*3 IPsec setting ActiveSecurity Protocol*3 Method of the Security Protocol ESP/ESP & AH/AHPrinter Name Printer name Printer name (Up to 15 characters)WSD WSD setting Enable/DisableWSD Timeout Timeout 1/5/10/15/20 [min]LLTD LLTD setting Enable/DisableLPR Protocol LPR protocol setting Enable/DisableBonjour Bonjour setting Enable/DisableBonjour ServiceNameBonjour service name Bonjour service name (Up to 52characters)Bonjour LPR Service Bonjour LPR service Enable/DisablePage 946 of 973 pagesPrinting Out Network Setting Information