Check 1: Did you confirm the paper and print quality settings?Print Results Not SatisfactoryCheck 2: Is the FINE Cartridge installed properly?If the Ink Cartridge Locking Cover is not closed securely, ink may not be ejected correctly.Open the Scanning Unit (Cover), open the Ink Cartridge Locking Cover, then close the Ink CartridgeLocking Cover.When you close the Ink Cartridge Locking Cover, push the Ink Cartridge Locking Cover until it clicksinto place.Check 3: Print the Nozzle Check Pattern and perform any necessarymaintenance operations such as Print Head Cleaning.Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print headnozzles.Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and PrintHead Deep Cleaning.If the Nozzle Check Pattern is not printed correctly:After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine thepattern.If the problem is not resolved after performing the Print Head Cleaning twice:Perform the Print Head Deep Cleaning.If the problem is not resolved after performing the Print Head Deep Cleaning, turn off themachine and perform another Print Head Deep Cleaning after 24 hours. When you turn themachine off, do not unplug it from the power supply.If the problem is not resolved after performing the Print Head Deep Cleaning twice:Ink may have run out. Replace the FINE Cartridge.Check 4: When a FINE Cartridge runs out of ink, replace it with a newone.Check 5: When using paper with one printable surface, make sure thatPage 828 of 973 pagesNo Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
