Available settings for an incoming call *2Change the number of times to ring the telephone.Ring countAvailable settings for a voice call *2Change the number of seconds until the machine starts ringing.Ring start time in Fax priority modeChange the number of seconds that the machine rings.Telephone ring time in Fax priority modeSet the machine to receive the fax after the machine stops ringing.Default action in Fax priority modeWhen subscribing to a ring pattern detection service provided by yourtelephone company:DRPD or Network switchWhen a call incomes, the telephone will ring. *1 The machine detects a fax call by the fax ringpattern.- If the call is a fax, the machine will receive the fax automatically.- If the machine does not detect the fax ring pattern, the telephone will continue ringing.NoteAvailable settings for a fax *2Change the number of times to ring the telephone.Ring countSet the fax ring pattern to be used when a fax incomes.DRPD: Fax ring pat.When not receiving voice calls:When receiving a fax only:Fax only modeWhen a fax incomes, the machine will receive the fax automatically.*1 The telephone may not ring when a call incomes even if it is connected to the machine,depending on the type or settings of the telephone.*2 The settings can be changed from the Reception settings menu. To display the Receptionsettings menu, press the FAX and Menu buttons successively, and select Reception settings in theFax settings menu.For details, refer to the on-screen manual: Advanced Guide .Page topPage 32 of 973 pagesSetting the Receive Mode