Advanced Guide TroubleshootingContents > Loading Paper / Originals > Loading Originals > Loading Originals on the Platen GlassLoading Originals on the Platen GlassYou can load originals to copy, fax, or scan on the Platen Glass.You may have to load the original in a different position depending on the function you selected in thecopy mode or scan mode. Load the original in the correct position according to the selected function. Ifyou do not load the original correctly, it may not be scanned properly.ImportantAfter loading the original on the Platen Glass, be sure to close the Document Cover before startingto copy, fax, or scan.1. Load an original on the Platen Glass.(1) Open the Document Cover.ImportantDo not place any object on the Document Cover. It will fall into the Rear Tray when theDocument Cover is opened and cause the machine to malfunction.When opening or closing the Document Cover, do not touch the buttons and LCD on theOperation Panel. Doing so may result in an unexpected operation.(2) Load the original WITH THE SIDE TO SCAN FACING DOWN on the PlatenGlass.Make sure of the proper position to load the original for each function.See How to Load Originals for Each Function .ImportantBe sure to observe the following when loading the original on the Platen Glass.- Do not place any objects weighing 4.4 lb / 2.0 kg or more on the Platen Glass.- Do not put any pressure of 4.4 lb / 2.0 kg or more on the Platen Glass, such as pressingdown the original.Failure to observe the above may cause the scanner to malfunction or the Platen Glass tobreak.2. Close the Document Cover gently.Page 97 of 973 pagesLoading Originals on the Platen Glass
