Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings UsingScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)Starting ScanGear (Scanner Driver)Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning.ScanGear can be started from MP Navigator EX or an application.NoteTo scan via a network connection, start ScanGear and set up the network environment beforescanning.Network Scan SettingsStarting from MP Navigator EXNavigation Mode ScreenFollow these steps to start ScanGear from the Navigation Mode screen of MP Navigator EX.1. Start MP Navigator EX and open the Navigation Mode screen.Starting MP Navigator EX2. Point to Scan/Import and click Photos/Documents (Platen).The Scan/Import window opens.3. Select the Use the scanner driver checkbox, then click Open Scanner Driver.The ScanGear screen appears.One-click Mode ScreenFollow these steps to start ScanGear from the One-click Mode screen of MP Navigator EX.1. Start MP Navigator EX and open the One-click Mode screen.Starting MP Navigator EXPage 550 of 973 pagesStarting ScanGear (Scanner Driver)