9. Remove the spring [1] and the Fixing Film Unit [2].• 2 Hooks [3]• Harness Guide [A][A][3][1][3][2]CAUTION:Be careful not to lose the spring because the spring issmall.Removing the Fixing PressureRoller■ Preparation1. Removing the Right Cover.(Refer to “Removing theRight Cover” on page 120)2. Removing the Left Cover.(Refer to “Removing theLeft Cover” on page 118 )3. Removing the Rear Upper Cover.(Refer to“Removing the Rear Upper Cover” on page 123)4. Removing the Rear Cover.(Refer to “Removing theRear Cover” on page 123)5. Removing the Rear Lower Cover.(Refer to“Removing the Rear Lower Cover” on page 123)6. Removing the Rear Cover Rib Unit.(Refer to“Removing the Rear Cover Rib Unit” on page 125 )7. Removing the Duplex Printing Reverse Drive Unit.(Refer to “Removing the Duplex Reverse Drive Unit”on page 179)8. Removing the Fixing Assembly.(Refer to “Removingthe Fixing Assembly” on page 200)9. Removing the Fixing Film Unit.(Refer to “Removingthe Fixing Film Unit” on page 201)■ ProcedureCAUTION:Be sure not to touch the surface of the Fixing PressureRoller.1. Remove the Fixing Pressure Roller [1].• 2 Bushings [2]• 1 Gear [3][1][2][3]Removing the Fixing MotorUnit■ Preparation1. Removing the Right Cover.(Refer to “Removing theRight Cover” on page 120)2. Removing the Controller Cover.(Refer to “Removingthe Controller Cover” on page 157)3. Removing the Wireless LAN PCB.(MF728Cdw /727Cdw / 724Cdw only) (Refer to “Removing theWireless LAN PCB (MF728Cdw / 727Cdw / 724Cdw)”on page 157)4. Removing the Main Controller PCB.(Refer to“Removing the Main Controller PCB” on page 157)5. Removing the Main Controller Support Plate.(Referto “Removing the Main Controller Support Plate” onpage 161)6. Removing the FAX PCB.(MF728Cdw / 727Cdw /725Cdn only) (Refer to “Removing the FAX PCB(MF728Cdw / 727Cdw / 725Cdw)” on page 171)4. Disassembly/Assembly205
