COPIER > FUNCTION > SPLMANItem DescriptionDetails To increase the secondary transfer bias.Use case When a trace which looks like toner scattering occurs around the text or print pattern depending onthe paper type or environment (especially in a low humidity environment)Adj/set/operate method Select the item, and then press Apply key.Display/adj/set range 0 to 10 : OFF1 : ONDefault value 0Related service mode COPIER > FUNCTION > SPL26535SPL89793Title Execution of re-transfer prevention modeDetails To lower the primary transfer bias.Use case When re-transfer occurs due to strong primary transfer biasAdj/set/operate method Select the item, and then press Apply key.Display/adj/set range 0 to 10 : OFF1 : ONDefault value 0SPL26433Title Execution of drum idle rotation modeDetails To execute idle rotation of the drum.Use case When thin, sharp horizontal lines appear in halftone images after a long downtimeAdj/set/operate method Select the item, and then press Apply key.Display/adj/set range 0 to 10 : OFF1 : ONDefault value 0SPL14682Title Execution of image fogging prevention mode 1Details To change the developing bias.Use case When toner is lightly transferred to the white area in case of printing an image with large white areausing glossy paperAdj/set/operate method Select the item, and then press Apply key.Display/adj/set range 0 to 10 : OFF1 : ONDefault value 0Related service mode COPIER > FUNCTION > VIFFNC > FOG-PVSPL83279Title Setting of Chinese paperDetails To change the transfer bias.Use case When a trace which looks like toner scattering occurs around the text or print pattern in case of usingChinese paperAdj/set/operate method Select the item, and then press Apply key.Display/adj/set range 0 to 10 : OFF1 : ONDefault value 0SPL50288Title Execution of ITB cleaning failure prevention 2Details To execute cleaning for one round of the ITB after printing 2 sheets. (It becomes 2 sheets intermittentmode.)More effective than CL-IMP.Use case When an image that was on 2 sheets before appears lightly depending on paper type and print pattern(especially high printing ratio) When the trailing edge of paper is soiled In such a case, image failurecan be prevented by setting this mode.8. Service Mode284
