● Export from and Import to a Different Device of the Same Model (Case B)In this use case, the exported setting information is copied to a different device of the same model.This enables efficient installation in the case of installing multiple devices of the same model at a time (for example, kitting).DCM fileExport ImportA different machineof the same model● Export from and Import to a Different Model (Case C)In this use case, the exported setting information is copied to a device of a different model.Not that all the information that can be exported using DCM can be imported, but this is effective in the case of replacing an olddevice or copying the settings of the base machine in an environment where various models exist.DCM fileExport ImportA different model■ Combination of Information Exported/Imported by DCM, Means, and StorageLocations● Information Exported/Imported as a DCM FileA DCM file is exported and imported using the Control Panel, remote UI, or the iW EMC server, depending on the situation of thesite.The information exported/imported differs depending on the means.Combinations of them are shown in the following table.Menu used Operation Information exportedSetting values ofmenu optionsAddress book*1 Service mode settingvalues[Settings/Registration]menuControl panel Yes (fixed) *2 Yes (fixed) *2 NoRemote UI Yes Yes With conditions*3Service mode Control panel No No YesRemote UI No No YesiW EMC/ MC DCM Plug-in iW EMC/ MC DCM Plug-in Yes Yes With conditions*4*1: Models without address books are excluded. In the case of a fax option model without SEND function, address books areexported only if a fax option is connected with the device.*2: When the [Settings/ Registration] menu is used from the Control Panel, both the setting menu information and the addressbook are imported/exported. It is not possible to export/import only either of them.Information which is not included in the data to be imported is not imported.*3: Service mode is added to the data to be exported only when service mode level 1 > COPIER > OPTION > USER > SMD-EXPT is set.For items to be imported, refer to "List of Items Which Can Be Imported".*4: It is included only in the data to be imported. If service mode data is not included in the data to be imported, the data is notimported.● DCM File Storage LocationDCM files are saved in the following locations.Operation Menu used Storage destinationOperation Panel [Settings/ Registration] menu USB flash driveService modeRemote UI [Settings/ Registration] menu PC local diskService modeDCM Pug-in DCM Pug-in Local disk of the iW EMC/MC server2. Technical Explanation59
