COPIER > OPTION > FNC-SWItem DescriptionCRG-PROCTitle Setting of the operation at the end of CRG lifeDetails To set the following 3 kinds of operations at the end of CRG life: Not stopped / Stopped once/Completelystopped.Adj/set/operate method Enter the setting value, and then press Apply key.Display/adj/set range 0 to 20 : Not stopped (default of B&W machine)1 : Stopped once (default for color machine)2 : Completely stoppedDefault value 1CRGLF-KTitle Reference value of components other than toner included in the CRG life (for K)Details Reference value of the life of the components other than toner (Drum / Developing Assembly / wastetoner) included in the life of CRG (for K)Adj/set/operate method Enter the setting value, and then press Apply key.Display/adj/set range 100 to 200Default value 100CRGLF-CLTitle Reference value of component other than toner included in the CRG life (for CMY)Details Reference value of the life of the components other than toner (Drum / Developing Assembly / wastetoner) included in the life of CRG (for CMY)Adj/set/operate method Enter the setting value, and then press Apply key.Display/adj/set range 100 to 200Default value 100■ DSPL-SWCOPIER > OPTION > DSPL-SWItem DescriptionCRGLW-LVTitle SW to display / hide the setting menu (user mode) of toner low threshold valueDetails To switch whether to display the menu to set the threshold value in user mode which generates toner low.Adj/set/operate method Enter the setting value, and then press Apply key.Display/adj/set range 0 to 1Default value 1■ IMG-MCONCOPIER > OPTION > IMG-MCONItem DescriptionTMIC-BKTitle ON/OFF of TMIC Bk PASCAL gamma LUT trailing edgecorrectionDetails To set ON/OFF of the trailing edge correction of Bk color PASCAL gamma LUT used by TMIC.When 1 is set, the density of the high density area is high.Therefore, while text and thin lines are clear, gradation of photos may become unnatural.When 0 is set, the density of the high density area becomes low. Therefore, while the gradation is im-proved, thin lines may be partly missing or characters may be faded.Use case • When gradation of photos become unnatural• When thin lines are partly missing or characters are fadedAdj/set/operate method Enter the setting value, and then press Apply key.Display/adj/set range 0 to 10: OFF, 1: ONDefault value 1Supplement/memo TMIC: Error diffusion correction of photo/high image quality.8. Service Mode293
