COPIER > FUNCTION > MISC-PItem DescriptionDetails To output the error log report.Adj/set/operate method Select the item, and then press Yes key.SPECTitle Output of spec reportDetails To output the spec report.The current device specifications such as the location, model information, and ROM version are output.Adj/set/operate method Select the item, and then press Yes key.ERDS-LOGTitle Output of Embedded-RDS logDetails To execute report output of the log relating to Embedded-RDS.The date, time, code, and details (up to 130 characters) of each error that occurred are output.Use case When using Embedded-RDSAdj/set/operate method Select the item, and then press Yes key.Related service mode COPIER> FUNCTION> INSTALL> COM-LOGSupplement/memo Embedded-RDS: Function to send device information such as the device counter, failure, and consum-ables to UGW via SOAP protocolUGW (Universal Gate Way): Remote monitoring service systemKEY-HIST *Title Output of key log reportDetails To output the key log report.The key log up to the time the FAX transmission task was input (the [START] key was pressed) is output.Adj/set/operate method Select the item, and then press Yes key.*: Fax model only■ SYSTEMCOPIER > FUNCTION > SYSTEMItem DescriptionPANEL-UPTitle Download from USB memory (PANEL)Details To perform downloading when PANEL exists in the root directory of the USB memory.Use case At upgradeAdj/set/operate method 1. Install the USB memory.2. Select the item, and then select Yes.3. Turn OFF and the ON the main power.Caution Do not turn OFF / ON the power before "Executing..." disappears.Display/adj/set range Yes / NoRelated service mode COPIER > FUNCTION > SYSTEM > DOWNLOAD, BKUP-UPLOGWRITETitle Writing sublog to USB memoryDetails To write sublog that includes the following information to the USB memory.• Job list (job name, user name, address book)• Communications log (address book, user name)• Job log (user name, job name)Use case When analyzing the cause of a problemAdj/set/operate method 1. Install the USB memory.2. Select the item, and then select Yes.3. Turn OFF and the ON the main power.Caution Do not turn OFF / ON the power before "Executing..." disappears.Display/adj/set range Yes / NoIMPORTTitle Reading of service mode setting value from USB memoryDetails To write the service mode setting values (excluding those related to Reader / ADF) to the USBmemory.Use case After replacing the Main Controller PCB8. Service Mode281
